Filter
Top Products
1-2
Getting Started
Getting Started
Getting Started
The instructions in this chapter show you how to install your
Agilent 86120C. You should be able to finish these procedures in about
ten to twenty minutes. After you’ve completed this chapter, continue
with Chapter 2, “Making Measurements”.
Refer to Chapter 6, “Specifications and Regulatory Information” for
information on operating conditions such as temperature.
If you should ever need to clean the cabinet, use a damp cloth only.
CAUTION This product has autoranging line voltage input. Be sure the supply voltage is
within the specified range.
CAUTION The front panel LINE switch disconnects the mains circuits from the mains
supply after the EMC filters and before other parts of the instrument.
CAUTION Install the instrument so that the LINE switch is readily identifiable and is easily
reached by the operator. The LINE switch or the detachable power cord is the
instrument disconnecting device. It disconnects the mains circuits from the
mains supply before other parts of the instrument. Alternately, an externally
installed switch or circuit breaker (which is really identifiable and is easily
reached by the operator) may be used as a disconnecting device.
CAUTION Install the instrument according to the enclosure protection provided. This
instrument does not protect against the ingress of water. This instrument
protects against finger access to hazardous parts within the enclosure.