Filter
Top Products
4-105
Programming Commands
TRIGger Subsystem
INITiate:CONTinuous
Selects single or continuous measurement acquisition.
Syntax
:INITiate:CONTinuous{?| {ON | OFF | 1 | 0}}
Attribute
Summary
Non-sequential command
Preset State: on
*RST State: off
SCPI Compliance: standard
Description When on is specified, the instrument continuously measures the input
spectrum.
Non-sequential command
Always use an *OPC? query or a *WAI command to ensure that this command has
the time to complete before sending any more commands to the instrument. Refer
to “Always force the Agilent 86120C to wait for non-sequential commands” on
page 3-12 for more information.