Filter
Top Products
1-4
Getting Started
Step 1. Inspect the Shipment
Step 1. Inspect the Shipment
1 Verify that all system components ordered have arrived by comparing
the shipping forms to the original purchase order. Inspect all shipping
containers.
If your shipment is damaged or incomplete, save the packing materials and notify
both the shipping carrier and the nearest Agilent Technologies sales and service
office. Agilent Technologies will arrange for repair or replacement of damaged or
incomplete shipments without waiting for a settlement from the transportation
company. Notify the Agilent Technologies customer engineer of any problems.
2 Make sure that the serial number and options listed on the instrument’s
rear-panel label match the serial number and options listed on the
shipping document. The following figure is an example of the rear-panel
serial number label: