Filter
Top Products
4-96
Programming Commands
STATus Subsystem
PRESet
Presets the enable registers and the PTRansition and NTRansition fil-
ters.
Syntax
:STATus:PRESet
Attribute
Summary
Preset State: none
*RST State: none
SCPI Compliance: standard
Command Only
Description The PRESet command is defined by SCPI to affect the enable register.
If you want to clear all event registers and queues, use the *CLS com-
mand.
Example
OUTPUT 720;”:STATUS:PRESET”
Table 4-18. Preset Values
Status Node Preset Value
Operation enable register 0
Questionable enable register 0
PTRansition filters 32767
NTRansition filters 0