Filter
Top Products
7-2
Reference
Reference
Reference
Instrument Preset Conditions
Table 5-22. Instrument Preset Conditions (1 of 2)
Item
Settings after Preset
Key Pressed
Settings after Power
Turned On
Display mode single wavelength
last state
a
Wavelength range limiting on last state
Start wavelength 1270 nm last state
Stop wavelength 1650 nm last state
Graphical display off off
Measurement acquisition continuous last state
Wavelength calibration vacuum last state
Elevation correction value not affected last state
Wavelength units nm last state
Amplitude units dBm last state
Power offset 0 dB last state
Peak threshold 10 dB last state
Peak excursion 15 dB last state
Measurement speed normal last state