Filter
Top Products
4-77
Programming Commands
DISPlay Subsystem
MARKer:MAXimum:NEXT
Moves the marker to the laser line with the next lower power level.
Syntax
:DISPlay:MARKer:MAXimum:NEXT
Attribute
Summary
Preset State: marker set to maximum-power laser line
*RST State: marker set to maximum-power laser line
SCPI Compliance: instrument specific
Command Only
Description If the display is in the List by WL mode, it will be changed to List by
Ampl before the marker is moved.
MARKer:MAXimum:PREVious
Moves the marker to the laser line that has the next higher power
level.
Syntax
:DISPlay:MARKer:MAXimum:PREVious
Attribute
Summary
Preset State: marker set to maximum-power laser line
*RST State: marker set to maximum-power laser line
SCPI Compliance: instrument specific
Command Only
Description If the display is in the List by WL mode, it will be changed to List by
Ampl before the marker is moved.