Filter
Top Products
1-6
Getting Started
Step 3. Connect a Printer
3 Connect the other end of the line-power cord to the power receptacle.
Various power cables are available to connect the Agilent 86120C to ac
power outlets unique to specific geographic areas. The cable appropri-
ate for the area to which the Agilent 86120C is originally shipped is
included with the unit. The cable shipped with the instrument also has
a right-angle connector so that the Agilent 86120C can be used while
sitting on its rear feet. You can order additional ac power cables for
use in different geographic areas. Refer to “Power Cords” on
page 7-18.
Step 3. Connect a Printer
The Agilent 86120C can print hardcopies of measurement results on a
printer. The output is ASCII text. If you don’t have a printer, continue
with “Step 4. Turn on the Agilent 86120C” on page 1-7.
1 Using a standard parallel printer cable, connect the printer to the
Agilent 86120C’s rear-panel PARALLEL PRINTER PORT connector.