Filter
Top Products
3-16
Programming
Monitoring the Instrument
Monitoring the Instrument
Almost every program that you write will need to monitor the
Agilent 86120C for its operating status. This includes querying execu-
tion or command errors and determining whether or not measure-
ments have been completed. Several status registers and queues are
provided to accomplish these tasks.
In this section, you’ll learn how to enable and read these registers. In
addition to the information in this section, you should review the com-
mands documented in “Common Commands” on page 4- 3 and “STATus
Subsystem” on page 4-90.