Filter
Top Products
The HBAnyware Utility User Manual Page 5
6. You are asked if your Web server is listening on the normal default HTTP port (80)? Answer Y or
N as appropriate. If you answer N, you are prompted for the port you wish to use.
You are notified when the installation of the HBAnyware Web Launch package is complete.
Once the necessary information is entered, you are notified when the installation of the HBAny-
ware Web Launch package is complete. The Web Launch configuration files are created and
Web Launch Services automatically starts.
7. To verify installation, locate another client, open a Web browser window and enter this URL
according to this format:
http://IP_ADDR:PORT_NUM/hbanyware.jnlp
where IP_ADDR is the IP address of host on which you installed the HBAnyware Web Launch
service, and PORT_NUM is the TCP port number of the listening hosts' Web server. The stan-
dard HBAnyware user interface is displayed.
Installing the HBAnyware Utility Security Configurator
The Emulex driver and the HBAnyware utilities must be installed before you can install the HBAnyware
Security Configurator.
To install the HBAnyware utility Security Configurator:
In Windows:
1. Locate the SSCsetup.exe file. The default path for this file is:
C:\Program Files\HBAnyware
2. Double-click the SSCsetup.exe file. A welcome window appears.
3. Click Next. The Setup Status window is displayed. After setup completes, the Emulex
HBAnyware Security Setup Completed window appears.
4. Click Finish.
In Solaris LPFC and Solaris SFS:
1. Copy the <HBAnywareSSC_version>.tar.gz file to a directory on the install machine.
2. cd to the directory to which you copied the gz file.
3. Untar the file. Type:
gzcat <HBAnywareSSC_version>.tar.gz | tar xvf-
4. Log on as ‘root’.
5. At the shell prompt, type:
pkgadd -d `pwd`
6. When prompted by pkadd, choose to install HBAnywareSSC.
7. When prompted by pkadd, answer the HBAnyware installation option questions.
In Linux:
1. Log on as ‘root’.
2. Change (use the cd command) to the directory to which you copied the tar file. (See “Installing
the Utilities and the application helper module” on page 7 step 2 for reference.)
3. Run the install script with the "ssc" parameter specified. Type:
./install ssc