Filter
Top Products
The HBAnyware Utility User Manual Page 112
GetDriverParamsGlobal
Syntax: hbacmd GetDriverParamsGlobal <WWPN>
Description: Shows the name and the global value of each driver parameter for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose driver parameter global names and values you wish
to view
SetDriverParam
Syntax: hbacmd SetDriverParam <WWPN> <Flag1> <Flag2> <Param> <Value>
Description: Allows you to change the value of a driver parameter and designate the scope of that
change.
Parameters:
WWPN - World Wide Port Name of the HBA whose driver parameters you wish to change
Flag1 - L = Make change local for this HBA only, G = Make change global (all HBAs on this host)
Flag2 - P = Make change permanent (persists across reboot), T = Make change temporary
Param - Name of the parameter to modify
Value - New value you want to assign to the parameter (Input as decimal, prefix with 0x to input as hex)
SetDriverParamDefaults
Syntax: hbacmd SetDriverParamDefaults <WWPN> <Flag1> <Flag2>
Description: Changes all values to the default for the HBA(s).
Parameters:
WWPN - World Wide Port Name of the HBA whose values you want to change to the default
Flag1 - L = Make changes local for this HBA only, G = Make changes global (all HBAs on this host)
Flag2 - P = Make changes permanent (persists across reboot), T = Make changes temporary
SetBootBios
Syntax: hbacmd SetBootBios <WWPN> <Flag>
Description: Enables or disables the boot code on the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose boot code you wish to enable or disable
Flag - E = Enable the boot code, D = Disable the boot code
GetAuthConfig
Syntax: hbacmd GetAuthConfig <WWPN1> <WWPN2>
Description: Retrieves the authentication configuration for the HBA.
Parameters:
WWPN1 - World Wide Port Name of the HBA whose configuration data you wish to retrieve
WWPN2 - Must be ff:ff:ff:ff:ff:ff:ff:ff