Filter
Top Products
The HBAnyware Utility User Manual Page 72
console-
notices
Min: 0x00000000
Max:0xFFFFFFFF
Default: 0x0000000
Verbose mask for notice
messages to the console.
log-verbose Min:0x0
Max:0xffff
Default:0x0
(bit mask) When set to
nonzero this variable causes
LPFC to generate additional
messages concerning the
state of the driver and the
I/O operations it carries out.
These messages may go to
the system console.
console-
warnings
Min: 0x00000000
Max:0xFFFFFFFF
Default: 0x0000000
Verbose mask for warning
messages to the console.
log-verbose Min:0x0
Max:0xffff
Default:0x0
(bit mask) When set to
nonzero this variable causes
LPFC to generate additional
messages concerning the
state of the driver and the
I/O operations it carries out.
These messages may go to
the system console.
console-
errors
Min: 0x00000000
Max:0xFFFFFFFF
Default: 0x0000000
Verbose mask for error
messages to the console.
log-verbose Min:0x0
Max:0xffff
Default:0x0
(bit mask) When set to
nonzero this variable causes
LPFC to generate additional
messages concerning the
state of the driver and the
I/O operations it carries out.
These messages may go to
the system console.
cr-delay Min:0
Max:63
Default:0
Description: Specifies a
count of milliseconds after
which an interrupt response
is generated if the cr-count
has not been satisfied. This
value is set to 0 to disable
the Coalesce Response
feature as default.
cr-delay Min:0
Max:63
Default:0
Description: Specifies a
count of milliseconds after
which an interrupt response
is generated if the cr-count
has not been satisfied. This
value is set to 0 to disable
the Coalesce Response
feature as default.
Setting this value
can minimize
CPU utilization by
reducing the
number of
interrupts that the
driver generates
to the operating
system.
Table 5: Solaris SFS and Solaris LPFC Driver Parameter Cross-Reference (Continued)
Solaris SFS/
HBAnyware
Parameter
Solaris SFS/HBAnyware
Min/Max, Defaults and
Description
Related
LPFC
Parameter
LPFC Min/Max, Default and
Description
Comments