Filter
Top Products
The HBAnyware Utility User Manual Page 114
InitiateAuth
Syntax: hbacmd InitiateAuth <WWPN1> <WWPN2>
Description: Initiates the authentication configuration on the HBA.
Parameters:
WWPN1 - World Wide Port Name of the HBA whose authentication configuration you wish to initiate
WWPN2 - Must be ff:ff:ff:ff:ff:ff:ff:ff
PCIData
Syntax: hbacmd PCIData <WWPN>
Description: Shows PCI configuration data for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose configuration data you wish to view
Wakeup
Syntax: hbacmd Wakeup <WWPN>
Description: Shows wakeup parameter data for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose wakeup parameter data you wish to view
LoopMap
Syntax: hbacmd LoopMap <WWPN>
Description: Shows the arbitrated loop map data for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose arbitrated loop map data you wish to view
GetBeacon
Syntax: hbacmd GetBeacon <WWPN>
Description: Shows the current beacon status for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose current beacon you wish to view
SetBeacon
Syntax: hbacmd SetBeacon <WWPN> <BeaconState>
Description: Sets the current beacon status for the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA whose beacon you wish to change
BeaconState - New state of the beacon: 0 = Off, 1= On