Filter
Top Products
The HBAnyware Utility User Manual Page 16
1. From the Discovery menu, select TCP/IP>Add Host. The Add Remote Host dialog box appears.
Figure 8: Add Remote Host dialog box
2. Enter the name or the IP address of the host to be added. Entering the IP address is the best
way to add a new host.
3. Click OK. You will receive a message indicating whether or not the new host was successfully
added.
Adding a Range of Hosts
You can find the TCP/IP accessed manageable hosts by searching a range of IP addresses using the
Add Range of IP Hosts dialog box.
Figure 9: Add Range of IP Hosts dialog box
The Add Range of IP Hosts dialog box enables you to build the initial list of TCP/IP accessed
manageable hosts.
To add a range of hosts:
1. From the Discovery menu, select TCP/IP>Add Range of Hosts. The Add Range of IP Hosts
dialog box appears.
2. Enter the complete start and end address range and click Add. The added address range
appears in the dialog box. Add any additional ranges you wish to search.
Note: Using the IP address to identify the host avoids name resolution issues.