Filter
Top Products
The HBAnyware Utility User Manual Page 69
console-errors 0x00000000 0x00000000 0xFFFFFFFF Requires
reboot.
Verbose mask for
error messages to the
console.
cr-count 1 1 255 Requires
link reset.
This value specifies a
count of I/O
completions after
which an interrupt
response is
generated. This
feature is disabled if
cr-delay is set to 0.
cr-delay 0 0 63 Requires
link reset.
This value specifies a
count of milliseconds
after which an
interrupt response
generated if cr-count
has not been satisfied.
This value is set to 0
to disable the
Coalesce Response
feature as default.
enable-auth 0 0 1 Requires
link reset.
This driver property
specifies if the DH-
CHAP is enabled or
not. When set to 1,
DH-CHAP is enabled.
When set to 0,
DHCHAP support is
disabled.
link-speed 0 0=auto select
1=1G
2=2G
4=4G
Requires
link reset.
Sets link speed for
initializing Fibre
Channel connection.
linkup-delay 10 0 60 Requires
HBA reset.
Sets the linkup delay
period (seconds) after
adapter initialization.
log-notices 0xFFFFFFFF 0x00000000 0xFFFFFFFF Requires
reboot.
Verbose mask for
notice messages to
the messages file.
log-warnings 0xFFFFFFFF 0x00000000 0xFFFFFFFF Requires
reboot.
Verbose mask for
warning messages to
the messages file
log-errors 0xFFFFFFFF 0x00000000 0xFFFFFFFF Requires
reboot.
Verbose mask for
error messages to the
messages file
Table 4: emlxs.conf Parameters (Continued)
Property
Name
Default Min Max Activation Comments