Emulex 3.3 Frozen Dessert Maker User Manual


 
The HBAnyware Utility User Manual Page 35
Viewing Target Mapping (Linux)
Use this tab to view target mapping. The Target Mapping tab is read-only.
To view target mapping:
1. Select Host or Fabric sort.
2. Select the HBA in the discovery-tree whose target mapping information you wish to view.
3. Select the Target Mapping tab.
Figure 24: Target Mapping tab
Target Mapping Field Definitions
Current Settings Area
Active Bind Type -N/A
Automapping - N/A
Current Mappings Area
This table lists current mapping information for the selected HBA.
Persistent Binding Configuration Area
•N/A
Display Mode Radio Buttons
•N/A
Target Mapping Buttons
•N/A
Note: Persistent binding is not supported by the Linux 2.6 kernel or by the Emulex version 8 driver for Linux.