Filter
Top Products
The HBAnyware Utility User Manual Page 108
TargetMapping
Syntax: hbacmd TargetMapping <WWPN>
Description: Shows a list of mapped targets and the LUNs for the port.
Parameters:
WWPN - World Wide Port Name of the HBA whose target mapping you wish to view
Reset
Syntax: hbacmd Reset <WWPN>
Description: Resets the HBA. An HBA reset may require several seconds to complete, especially for
remote devices. Once the reset command is completed, the system command prompt is displayed.
Parameters:
WWPN - World Wide Port Name of the HBA you wish to reset
Download
Syntax: hbacmd Download <WWPN> <FileName>
Description: Loads the firmware image to the HBA.
Parameters:
WWPN - World Wide Port Name of the HBA to which you want to load firmware
FileName - File name of the firmware image to load (this can be any file accessible to the CLI client
application)
GetLunList
Syntax: hbacmd GetLunList <HBA WWPN> <Target WWPN> <Option>
Description: Queries for the presence of any LUNs.
Parameters:
HBA WWPN - World Wide Port Name of the HBA you wish to query
Target WWPN - World Wide Port Name of the target you wish to query
Option - 0 = Get information from driver, 1 = Get information from configuration
GetLunUnMaskbyHBA
Syntax: hbacmd GetLunUnMaskByHBA <HBA WWPN> <Option>
Description: Queries for the presence of any unmasked LUNs by HBA.
Parameters:
HBA WWPN - World Wide Port Name of the HBA you wish to query
Option - 0 = Get information from driver, 1 = Get information from configuration