Template Version 1.0
22 GL-1020 Administrator’s Guide
GL-1020 tools, to establish network printing to the controller
from client workstations.
PART 3: Managing the System
Chapter 10, Managing Operations—describes how to use the
control panel and the TopAccess interface to manage the device
and jobs.
Chapter 11, Managing the Address Book
—includes instructions
for adding and modifying contact information, sorting address
book lists, searching the address book, and importing/exporting
address book data.
Chapter 12, Managing Scan Operations
—explains how to create
and use scan templates, and how to monitor the scan job status.
Chapter 13, Maintaining the System
—includes procedures for
backing up, restoring and archiving files, and for recovering and
updating the controller software.
PART 4: Troubleshooting Network Printing
Chapter 14, Troubleshooting Overview—identifies the origin of
an error if it is not immediately apparent from the problem itself,
and then directs you to subsequent chapters for instructions on
resolving it. Checklists provided in this chapter allow you to
identify the subsystem that is most likely to be responsible for the
error condition.
Chapter 15, Troubleshooting Hardware Errors
—covers those
errors or faults that affect normal digital copier or controller
operation.
Chapter 16, Troubleshooting Network Errors
—describes the most
common network configuration problems and provides steps for
resolving them.
Chapter 17, Troubleshooting Client Errors
—describes the most
frequent client errors and provides steps for resolving them.
Chapter 18, Troubleshooting Output Errors
—describes several
common output errors and gives the likely cause. This chapter
also suggests ways to resolve or work around the limitation to
achieve the desired output effects.
PART 5: Reference
Chapter 19, Reference—documents each tab on the TopAccess
start page.
Glossary of Terms
