A SERVICE OF

logo

04_TAConfigureNetworkProtocols.fm Modified: 8/16/02
Template Version 1.0
GL-1020 Administrator’s Guide 99
4 Select Enable to enable AppleTalk.
This is the default setting.
5 Enter the AppleTalk Zone string.
6Click
Save.
7 Follow the instructions in Applying Changes to Protocol
Settings on page 96.
Restoring Default Protocol Settings
You can restore the network settings to their default values.
Restoring the defaults returns the device to the state in which it
was delivered from the factory.
1 On the Administration tab, click the
Setup subtab.
2Click the
Network link.
The Network page opens.
3Click
Restore Defaults to restore the default settings.
4Click
Yes.
5 Follow the instructions in Applying Changes to Protocol
Settings on page 96.