07_ContHardwareErrors.fm Modified: 8/16/02
Template Version 1.0
248 GL-1020 Administrator’s Guide
Jobs Log
The following messages may appear in the Status column of the
Jobs Log. The table indicates the probable cause and the action
you can take to resolve the error. If the error condition persists,
contact your TOSHIBA authorized dealer for support.
Set staple cartridge of
saddle stitch unit
Set staple cartridge of
saddle stitch unit
Set the staple cartridge of the
saddle stitch unit.
Time for periodic
maintenance
Time for periodic
maintenance
Time for periodic maintenance.
Contact your TOSHIBA authorized
dealer for support.
USE GENUINE TOSHIBA
TONER
Use genuine
TOSHIBA Toner
Check and adjust the toner bottle.
WAIT Wait - Self
maintenance
Please wait - Self maintenance in
progress.
Wait adding toner Wait - Adding toner Wait - Adding toner.
Jobs Log Status Messages
Message Cause Corrective Action
Canceled
Job was cancelled by
the administrator or
the end user.
Resubmit the job.
Completed
Job printed
successfully.
No action required.
Controller Authentication Sig-
nature Not Found
Problem locating or
communicating with
the controller.
Reboot the controller from the
copier’s control panel or by using
TopAccess.
Deleted
Job was deleted by
the administrator or
the end user.
Resubmit the job.
Message Log Error Messages (Continued)
LCD Message
TopAccess
Message Corrective Action
