04_ContProtocolsControlPanel.fm Modified: 8/16/02
Template Version 1.0
GL-1020 Administrator’s Guide 43
3Press NETWORK SETTING to display the Network Setting
screen.
Sample Network Setting screen on copier control panel
4 To access specific protocol settings, press the applicable soft
key.
For more details, refer to the following pages in this manual:
w TCP/IP server (see Configuring TCP/IP Protocol Set-
tings on page 44)
w WINS server (see Setting Up WINS and DNS Servers on
page 45)
w IPX/SPX (see Configuring IPX/SPX Protocol Settings on
page 45)
w Ethernet speed (see Configuring the Ethernet Speed Set-
tings on page 47)—only for Ethernet
w AppleTalk (see Configuring AppleTalk Protocol Settings
on page 48)—only for Ethernet
After you are finished updating network or device settings, you
must apply the changes you made during the session. This
process updates and reboots the controller so the modifications
can take effect. If you don’t apply your changes, they will be lost
when you press
COPY or the copier times out.
Note: Check the configuration page that automatically prints
upon start up to confirm that the changes were applied.
