07_PrintPrinterDriverErrors.fm Modified: 8/16/02
Template Version 1.0
GL-1020 Administrator’s Guide 275
Corrective Action
1 Open the Printers folder from the Control Panel.
2 Right-click the TOSHIBA printer driver icon.
3 Select
Properties from the shortcut menu.
4 Depending on the operating system, select the following tab:
5 Make sure that the path to the printer and the device name are
correct. \\
<device name \<driver>
Where <device name> is the same as the device name set
from the copier LCD touch screen. For the <driver> portion,
it should be one of the following TOSHIBA GL-1020
drivers:
w GL_PCL6
w GL_PS
6 Click the
General Tab and click Print Test Page to confirm that
the settings are correct.
Command Line Options Not Processed by GL-1020
Problem Description
All print options are sent to the GL-1020 at the start of the print
job. If the print file already contains print commands, they
override the command line options you set. For example, if the
print file specifies the Letter media, and you specify the A4
media option with the
lp command, the document is output on
letter size paper (provided, of course, that all copier-related
restrictions have been met).
Corrective Action
Change the properties in the document you want to print and
recreate the print file. Submit the print job using the LP command
without setting additional parameters.
In Windows
®
98/Me/2000/XP: In Windows NT
®
:
Select Details. Browse to select
the printer or Novell queue.
Select Ports. Add a new
port and map it to the
printer. Refer to GL-1020
Operator’s Guide (Basic)
for instructions.
