04_ContProtocolsControlPanel.fm Modified: 8/16/02
Template Version 1.0
44 GL-1020 Administrator’s Guide
Configuring TCP/IP Protocol Settings
1 From the Network Setting screen, press
TCP/IP.
The TCP/IP Setting screen opens.
Sample TCP/IP Setting screen on copier control panel
By default, the IP Address acquisition mode is DHCP. So, if
you are entering this screen for the first time, the other fields
are not editable.
2 Press the double-arrow to access the WINS Server setup
screen.
3Press
MANUAL.
4Enter the
IP ADDRESS, SUBNET, and GATEWAY using the control
panel’s numeric keypad.
5 To view or modify the WINS server IP Addresses, press the
double-arrow and continue with S
etting Up WINS and DNS
Servers on page 45. Otherwise, press OK to save the changes.
Double arrow
