04_TAConfigureNetworkProtocols.fm Modified: 8/16/02
Template Version 1.0
GL-1020 Administrator’s Guide 97
Configuring Ethernet NIC Speed
1 On the Administration tab, click the
Setup subtab.
2Click the
Network link.
The Network page opens.
3 In the Ethernet area, click the Speed drop-down list.
4 Select the appropriate speed for the controller's NIC.
The default setting is Auto, which automatically senses and
sets the correct speed.
5Click
Save.
6 Follow the instructions in Applying Changes to Protocol
Settings on page 96.
Configuring IPX/SPX Settings
1 On the Administration tab, click the
Setup subtab.
2Click the
Network link.
The Network page opens.
3 In the IPX/SPX area, click the Protocol drop-down list.
4 Select
Enable to enable IPX/SPX.
This is the default setting.
5 Click the Frame Type drop-down list.
6 Select the appropriate setting.
The default setting is Auto.
7Click
Save.
8 Follow the instructions in Applying Changes to Protocol
Settings on page 96.
Configuring TCP/IP Settings
1 On the Administration tab, click the
Setup subtab.
2Click the
Network link.
The Network page opens.
3 In the TCP/IP area, click the IP Address Resolution drop-
down list.
4 Select either
Static IP or DHCP.
