A SERVICE OF

logo

Open as PDF
next previous
HTML Operation, cont’d
MTPX Plus Twisted Pair Matrix Switchers • HTML Operation
6-18
Changing the input gain and attenuation
Userscanseteachinput’slevelofaudiogainorattenuation(-18dBto+24dB)
from the I/O Settings page. Audio levels can be adjusted so there are no noticeable
volume differences between sources.
Change an input’s gain and attenuation setting as follows:
1. Click the desired input’s Input Audio Level drop box. A drop-down scroll
boxappears(gure6-15).
Figure 6-15 — Input Audio Level drop box
2. Click and drag the slider or click on the scroll up
button or the scroll down
button until the desired value is visible.
N
As an alternative to steps 1 and 2, or to listen to the audio as you make
adjustments, click on the up
button or down button.