1-9
MTPX Plus Twisted Pair Matrix Switchers • Introduction
Operational flexibility — Operations such as input/output selection, setting of
presets, and adjustment of audio levels can be performed on the front panel
or via either serial port. The serial ports allow remote control via a PC or a
control system.
• Front panel controls — The front panel controls support input and output
selection, preset creation and selection, audio gain and attenuation, and
volume control. The front panel features slots for labels that can identify each
input and output with text or graphics.
• Windows-based control program — For serial port remote control from a
PC, the Extron Windows-based Matrix Switchers Control Program provides
a graphical interface and drag-and-drop/point-and-click operation. The
Windows-based control program also has an emulation mode that lets you
create a switcher configuration file at the home office and then download it
for use by the switcher on site.
• Simple Instruction Set (SIS) — The remote control protocol uses Extron’s SIS
for easy programming and operation.
• Remote control panels and keypads — The matrix switchers are remote
controllable, using the optional MKP 2000 and MKP 3000 remote control
keypads. These remote control devices are easy to use and provide tactile
buttons for quick selection. Each MKP can be used for input-to-output
switching or one-touch switching for a particular output. The MKP 3000 also
can be used for selection of global presets.
Upgradeable firmware — The firmware that controls all switcher operations can be
upgraded in the field via either serial port, without taking the switcher out of
service. Firmware upgrades are available for download on the Extron Web
site, www.extron.com, and can be installed using the Windows-based control
program.
Labeling — The Extron button label software is shipped with every Extron matrix
switcher. You can create labels to place above the front panel input buttons
and below the output buttons, with names, alphanumeric characters, or color
bitmaps for easy and intuitive input and output selection. Alternatively,
labels can be made with any Brother
®
P-Touch
™
or comparable labeler.
Global memory presets — 32 global memory presets are a time-saving feature that
lets you set up and store input/output configurations in advance. You can
then recall those configurations, when needed, with a few simple steps on the
front panel.
Rack mounting — The2Uhigh(matrixsizes1616andsmaller)or3Uhigh(matrix
sizes1632andlarger)enclosureisrackmountableinanyconventional19"
wide rack.
Three front panel security lockout modes (Executive modes) — If a matrix
switcher is installed in an open area, where operation by unauthorized
personnel may be a problem, either of two security lockout modes can be
implemented (the third mode is unlocked). When a front panel lockout
mode is enabled, a special button combination or SIS command is required to
unlock the front panel controlls and make the front panel fully operational.
Power — The matrix switcher’s 100 VAC to 240 VAC internal power supply
provides worldwide power compatibility.
