Filter
Top Products
95
Parameter list
Parameter list
5
ADJUSTMENT
Frequency setting with terminals (contact input) — Remote setting function (Pr.59)
59
Remote function
selection
10
0
RH, RM, RL signal
function
Frequency setting
storage function
Multi-speed setting ⎯
1
Remote setting
Used
2 Not used
3
No (Turning STF/STR
OFF clears remotely-
set frequency.)
11
Remote setting
(These setting values
enable deceleration to
the frequency lower
than the set
frequency.)
Used
12 Not used
13
Not used (Turning
STF/STR OFF clears
remotely-set
frequency.)
Energy saving operation — Energy saving control selection (Pr.60)
60
Energy saving control
selection
10
0 Normal operation mode
4 Energy saving operation mode
9 Optimum excitation control mode
Operation setting at fault occurrence — Retry at fault occurrence (Pr.65, Pr.67 to Pr.69)
65
Retry selection
1 0 0 to 5 A fault for retry can be selected.
67
Number of retries at
fault occurrence
10
0 No retry function
1 to 10
Set the number of retries at fault occurrence. A
fault output is not provided during retry
operation.
101 to 110
Set the number of retries at fault occurrence.
(The setting value - 100 is the number of
retries.) A fault output is provided during retry
operation.
68
Retry waiting time
0.1s 1s 0 to 10s
Set the waiting time from when an inverter fault
occurs until a retry is made.
69
Retry count display
erase
100
Clear the number of restarts succeeded by
retry.
66
Refer to Pr.22 and Pr.23.
67 to 69
Refer to Pr.65.
70
Refer to Pr.30.
Selection and protection of a motor — Motor selection (general-purpose motor, IPM
motor) (Pr.71)
71
Applied motor
10 *
0
Thermal characteristics of a standard motor
1
Thermal characteristics of the Mitsubishi
constant-torque motor
2
Thermal characteristic of standard motor
Adjustable 5 points V/F
20
Mitsubishi standard motor (SF-JR 4P 1.5kW or
less)
120
High-efficiency IPM motor MM-EF
210
Premium high-efficiency IPM motor MM-EFS
* Performing IPM parameter initialization changes the settings. (Refer to page 43)
Parameter
Name
Incre-
ments
Initial
Value
Range Description
Parameter
copy
Parameter
clear
All parameter
clear
Related
parameters
: enabled
× : disabled
V/F
V/F
V/F