Filter
Top Products
114
Parameter list
Monitor display and monitor output signal — Adjustment of terminal FM and AM
(calibration) (C0(Pr.900), C1(Pr.901))
C0
(900)
FM terminal
calibration
--- --- ---
Calibrate the scale of the meter connected to
terminal FM.
×
C1
(901)
AM terminal
calibration
--- --- ---
Calibrate the scale of the analog meter
connected to terminal AM.
×
C2 (902)
to
C7 (905)
Refer to Pr.125 and Pr.126.
C42 (934)
to
C45 (935)
Refer to Pr.127 to Pr.134.
The parameter number in parentheses is the one for use with the parameter unit (FR-PU04/FR-PU07).
Useful functions — Parameter copy alarm release (Pr.989)
989
Parameter copy
alarm release
1 10/100 * 10/100 *
Parameters for alarm release at parameter
copy
×
* The setting depends on the inverter capacity (55K or lower/75k or higher)
Setting of the parameter unit and operation panel — Buzzer control of the operation panel
(Pr.990)
990
PU buzzer control
11
0 Without buzzer
1 With buzzer
Setting of the parameter unit and operation panel — PU contrast adjustment (Pr.991)
991
PU contrast
adjustment
1 58 0 to 63
Contrast adjustment of the LCD of the
parameter unit (FR-PU04/FR-PU07) can be
performed.
0 (Light) → 63 (Dark)
×
Useful functions — Fault initiation (Pr.997)
997
Fault initiation
1 9999
16 to 18,
32 to 34, 48,
49, 64, 80 to
82, 96, 97,
112, 128,
129, 144,
145, 160,
161,
176 to 179,
192 to 194,
196 to 199,
230, 241,
245 to 247,
253
The setting range is same with the one for
fault data codes of the inverter (which can
be read through communication). (Refer to
page 117)
Written data is not stored in EEPROM.
9999
The read value is always "9999."
This setting does not initiate a fault.
Parameter
Name
Incre-
ments
Initial
Value
Range Description
Parameter
copy
Parameter
clear
All parameter
clear
Related
parameters
: enabled
× : disabled