Filter
Top Products
85
Parameter list
5
ADJUSTMENT
Operation selection at power failure and instantaneous power failure — Decelerate the motor to a stop at instantaneous power failure (Pr.261 to
Pr.266)
107
Operation setting at fault occurrence — Input phase failure protection selection (Pr.251, Pr.872)
106
Operation setting at fault occurrence — Output function of fault code (Pr.76)
97
Operation setting at fault occurrence — Regenerative avoidance operation (Pr.665, Pr.882 to Pr.886)
112
Operation setting at fault occurrence — Retry at fault occurrence (Pr.65, Pr.67 to Pr.69)
95
Selection and protection of a motor — Motor protection from overheat (electronic thermal relay function) (Pr.9,
Pr.51)
88
Selection and protection of a motor — Motor selection (general-purpose motor, IPM motor) (Pr.71)
95
Selection of operation mode and command source — Operation command source and speed command source during communi-
cation operation (Pr.338, Pr.339)
108
Selection of operation mode and command source — Operation mode at power-ON (Pr.79, Pr.340)
97
Selection of operation mode and command source — Operation mode selection (Pr.79)
97
Setting of the parameter unit and operation panel — Buzzer control of the operation panel (Pr.990)
114
Setting of the parameter unit and operation panel — Operation selection of the operation panel (Pr.161)
104
Setting of the parameter unit and operation panel — Parameter unit language switchover (Pr.145)
102
Setting of the parameter unit and operation panel — PU contrast adjustment (Pr.991)
114
Special operation and frequency control — PID control (Pr.127 to Pr.134, Pr.553, Pr.554, Pr.575 to Pr.577, C42(Pr.934)
to C45(Pr.935))
100
Special operation and frequency control — Switching between the inverter and the bypass operation (Pr.135 to Pr.139,
Pr.159)
102
Useful function (energy saving operation) — Energy saving monitor (Pr.891 to Pr.899)
113
Useful functions — Automatic parameter setting (Pr.999)
115
Useful functions — Current average value monitor signal (Pr.555 to Pr.557)
110
Useful functions — Fault initiation (Pr.997)
114
Useful functions — Free parameter (Pr.888, Pr.889)
112
Useful functions — Lifespan extension of the cooling fan (Pr.244)
106
Useful functions — Maintenance of parts (Pr.503, Pr.504)
110
Useful functions — Parameter clear, parameter copy, initial value change list, and automatic pa-
rameter setting (Pr.CL, ALLC, Er.CL, PCPY, Pr.CH, IPM, AUTO)
115
Useful functions — Parameter copy alarm release (Pr.989)
114
Useful functions — To display life of inverter parts (Pr.255 to Pr.259)
107
V/F pattern setting — Adjustable 5 points V/F (Pr.71, Pr.100 to Pr.109)
98
V/F pattern setting — Base frequency and voltage (Pr.3, Pr.19, Pr.47)
87
V/F pattern setting — V/F pattern suitable for the application (Pr.14)
89