Filter
Top Products
72
Simple mode parameter list
*1 Initial values differ according to the inverter capacity. (0.75K/1.5K to 3.7K/5.5K, 7.5K/11K to 37K/45K, 55K/75K or higher)
*2 Initial values differ according to the inverter capacity. (55K or lower/75K or higher)
*3 Performing IPM parameter initialization changes the settings. (Refer to page 43)
*4 Initial values differ according to the inverter capacity. (7.5K or lower/11K or higher)
*5 Setting increments and setting range differ according to the inverter capacity. (55K or lower/75K or higher)
998
IPM parameter
initialization
10
0, 1, 12, 101,
112
By performing IPM parameter initialization, IPM
motor control is selected and the parameters,
which are required to drive an IPM motor, are
changed.
43
999
Automatic
parameter setting
1 9999
10, 11, 20, 21,
30, 31, 9999
Parameter settings are changed as a batch.
Those include communication parameter
settings for a Mitsubishi human machine
interface (GOT) connection, rated frequency
settings of 50Hz/60Hz, and acceleration/
deceleration time increment settings.
115
Parameter
Number
Name
Incre
ments
Initial
Value
Range Applications
Refer
to