Filter
Top Products
77
Energy saving operation (Pr. 60) <V/F>
5
ADJUSTMENT
Changing example Set "9" (Optimum excitation control) in Pr. 60 Energy saving control selection.
1.Screen at power-ON
The monitor display appears.
Display
Operation
3.Press to choose the parameter
setting mode.
4.
Turn until (
Pr. 60)
appears
.
Flicker ··· Parameter setting complete!!
7.Press to set.
5.Press to read the present set value.
" "(initial value) appears.
6.
Turn to change it to the set
value " ".
8. Perform normal operation.
When you want to check the energy saving effect,
refer to Chapter 4 of the Instruction Manual (Applied)
to check the energy saving effect monitor.
PU indicator is lit.
2.Operation mode setting
Press to choose the PU operation
mode.
· Press to show the setting again.
· Press twice to show the next parameter.
· By turning , you can read another parameter.
The parameter
number read
previously appears.