Filter
Top Products
86
Parameter list
5.10.2 Display of the extended parameters
REMARKS
If the setting has not been changed, the value does not flicker and the next parameter number appears.
Pr. 160 Description
9999
(Initial Value)
Only the simple mode parameters can be displayed.
0 Simple mode and extended mode parameters can be displayed.
1 Only the parameters registered in the user group can be displayed.
1. Screen at power-ON
The monitor display appears.
DisplayOperation
3.
Press to choose the parameter
setting mode.
4.
Tu
rn until (
Pr. 160)
appears.
Flicker ··· Parameter setting complete!!
7.
Press to set.
PU indicator is lit.
2. Operation mode setting
Press to choose
the PU operation mode.
·
Press twice to show the next parameter.
·
By turning , you can read another parameter.
·
Press to show the setting again.
The parameter
number read
previously appears.
After parameter setting is completed, press once to show the fault history and
press twice to return to the monitor display. To change settings of other parameters,
perform the operation in above steps 3 to 7.
5.
Press to read the currently set value.
" " (initial value) appears.
6.
Turn to change it to the set value
" ".