Filter
Top Products
104
Parameter list
Setting of the parameter unit and operation panel — Operation selection of the operation
panel (Pr.161)
161
Frequency setting/key
lock operation
selection
10
0
Setting dial frequency
setting
Key lock invalid
×
1
Setting dial
potentiometer
10
Setting dial frequency
setting
Key lock valid
11
Setting dial
potentiometer
162 to 165
Refer to Pr.57 and Pr.58.
166, 167
Refer to Pr.150 to Pr.153.
168, 169
Parameter for manufacturer setting. Do not set.
170, 171
Refer to Pr.52.
172 to 174
Refer to Pr.160.
Function assignment of external terminal and control — Function assignment of input
terminals (Pr.178 to Pr.189)
178
STF terminal function
selection
160
0 to 8,
10 to 12, 14,
16, 24, 25, 60,
62, 64 to 67,
70 to 72, 9999
0: Low-speed operation command (RL)
1: Middle-speed operation command (RM)
2: High-speed operation command (RH)
3: Second function selection (RT)
4: Terminal 4 input selection (AU)
5: Jog operation selection (JOG)
6: Selection of automatic restart after
instantaneous power failure, flying start
(CS)
7: External thermal relay input (OH)
8: 15-speed selection (combination with three
speeds RL, RM, RH) (REX)
10: Inverter run enable signal (FR-HC, MT-HC,
FR-CV connection) (X10)
11: FR-HC, MT-HC connection, instantaneous
power failure detection (X11)
12: PU operation external interlock (X12)
14: PID control valid terminal(X14)
16: PU/External operation switchover (X16)
24: Output stop (MRS)
25: Start self-holding selection (STOP)
60: Forward rotation command (STF)
(assigned to STF terminal (Pr.178) only)
61: Reverse rotation command (STR)
(assigned to STR terminal (Pr.179) only)
62: Inverter reset (RES)
63: PTC thermistor input (PTC) (assigned to
AU terminal (Pr.184) only)
64: PID forward/reverse action switchover
(X64)
65: PU/NET operation switchover (X65)
66: External/NET operation switchover (X66)
67: Command source switchover (X67)
70: DC feeding operation permission (X70)
71: DC feeding cancel (X71)
72: PID integral value reset (X72)
9999: No function
×
179
STR terminal function
selection
161
0 to 8,
10 to 12, 14,
16, 24, 25, 61,
62, 64 to 67,
70 to 72, 9999
×
180
RL terminal function
selection
10
0 to 8,
10 to 12, 14,
16, 24, 25, 62,
64 to 67,
70 to 72, 9999
×
181
RM terminal function
selection
11
×
182
RH terminal function
selection
12
×
183
RT terminal function
selection
13
×
184
AU terminal function
selection
14
0 to 8,
10 to 12, 14,
16, 24, 25,
62 to 67,
70 to 72, 9999
×
185
JOG terminal function
selection
15
0 to 8,
10 to 12, 14,
16, 24, 25, 62,
64 to 67,
70 to 72, 9999
×
186
CS terminal function
selection
16
×
187
MRS terminal
function selection
124
×
188
STOP terminal
function selection
125
×
189
RES terminal function
selection
162
×
Parameter
Name
Incre-
ments
Initial
Value
Range Description
Parameter
copy
Parameter
clear
All parameter
clear
Related
parameters
: enabled
× : disabled