Filter
Top Products
Troubleshooting Guide Model PH9073
Problem Shake Side
Probable Cause
Soft Serve Side
Probable Cause
Either Side
Probable Cause
Corrective Action Page
Ref.
23. Syrup toppings
are not hot.
a. No water i s in
topping well.
a. Fill to indicating mark.
44
b. The water is not
hot enough.
b. Using a thermometer , check the
water temperature in the
topping well. It should b e 140_F.
(60_C.). Open the side access
panel and turn the thermostat
screw CLOCKWISE in small
increments. Allow sufficient time
to recheck the water
temperature.
-- -- --
24. Product “popping”
when drawn.
a. Draw rate set too
fast.
a. The draw rate should be set at
5 to 7--1/2 oz. of product per 10
seconds.
15
b. Pump assembled
incorrectly.
b. Assemble and lubricate
according to instructions in this
manual.
31
25. Freezer shuts off,
but fault tone
continues.
a. Fault has
occurredinthe
freezer.
a. Verify condition in the
Operator’s Menu “fault” screen.
Clear fault accordingly.
20
b. Inadequate a ir
clearance a round
the freezer.
b. Maintain 3” (76 mm) of space
around all sides of the unit.
2
26. Syrup flows
constantly, or not
at all. Dif ficult to
calibrate syrups.
a. Syrup lines are
clogged.
a. Flush syrup lines with w arm
water and sanitize weekly.
60
b. Diaphragm is
faulty.
b. Clean or replace the diaphragm
syrup fitting.
48