Filter
Top Products
Troubleshooting 3M-Matic 800rf Case Sealer
6-6 Copyright 1999, 3M IPC. All rights reserved.
6-3. Pneumatic Component Testing
Using the solenoid actuated valves, located in the
Pneumatic Control Panel, you can manually actuate
the valves that initiate the operation of other
pneumatic components within the Model 800rf Case
Sealer. The valves have a center block actuator button
that can be used for testing.
Figure 6-1. Pneumatic Valve Locations
ü Note
Operate the valves one-at-time; deactuate one valve
before actuating another valve.
Figure 6-1 shows the locations of the solenoid
actuated valves within the Pneumatic Control Panel.