3M 39800 Food Saver User Manual


 
1-2. Description
The 800rf Case Sealer is controlled from two operator
control panels located on the front left side of the case
sealer. These control panels (Electrical Control Panel
and Pneumatic Control Panel) have the most-used
controls within easy reach of the operator. The case
sealer is microprocessor-based and firmware con-
trolled to maintain maximum and precise control over
all operations within the case sealer.
The case sealer may be operated in Random, Fixed, or
Bypass mode. A selector switch is located on the top
of the Electrical Control Panel.
Caution
Never change operating modes while a box is
in the case sealer. Change modes only after a
box exits the case sealer and before the next
box enters the case sealer.
In Random mode, the case sealer automatically
adjusts itself for a wide range of case sizes,
providing a tape seal on the top and bottom of the
cartons. Random mode is considered the standard
operating mode.
In Fixed mode, the case sealer runs multiple
cartons of the same (fixed) size, providing a tape
seal on the top and bottom of the cartons.
In Bypass mode, the case sealer passes certain
containers through the machine, providing a tape
seal only on the bottom of the containers. The top
of these containers is not sealed.
Description and Specifications 3M-Matic 800rf Case Sealer
1-2 Copyright 1999, 3M IPC. All rights reserved.
!