3M-Matic 800rf Case Sealer Disassembly/Reassembly
3M 1998 December 4-1
4. Disassembly/Reassembly
4-1. General
This section provides instructions for removing
components and major assemblies from the Model
800rf Type 39800 Case Sealer. Disassembly should
be done only to replace a faulty part. Be sure the
component is out of tolerance as defined in Section
3, Adjustments, before assuming it is worn or
defective.
4-2. Format
Many of the disassembly procedures in this section
are illustrated views with a minimum of supporting
text. The order of disassembly is indicated by circled
numbers with 1 being the first step, 2 the second step,
and so on. Reassembly is done in the reverse order of
disassembly.
Carefully review and understand each procedure
before the disassembly of any component. Often,
reference to the exploded view in Section 7,
Illustrated Parts Breakdown, aids disassembly and
subsequent reassembly.
Turn off the main air supply and electrical
power before removing any components.
Warning!