Filter
Top Products
1-31
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
OL-8376-01
Chapter 1 FAQs and Troubleshooting
Reports FAQs and Troubleshooting
Reports FAQs and Troubleshooting
• Reports FAQs, page 1-31
• Reports Troubleshooting, page 1-32
Reports FAQs
Q.
When does data for the reports get aggregated?
A.
The first weekly/monthly aggregation does not start at the beginning of the week/month. The first
aggregation might happen earlier than the beginning of the week/month. After the first
weekly/monthly aggregation, all subsequent weekly/monthly aggregation occurs every 7 days for
weekly aggregation, or every 30 days for monthly aggregation from the first time the aggregation
occurred.
Q.
Are any of the Current or Trend reports real-time reports?
A.
The reports are not real time. They are based on data that is collected periodically. The frequency
with which the data is collected is user configurable (see Devices > Discover > Inventory > Polling).
The data shown in reports is as current as the time the data was collected from the devices.
Q.
In the Group Performance Report: RF Utilization, how is the value in the As Of column calculated?
Table 1-2 Telnet/SSH Credentials Required
Device Login Sequence Telnet Credential Fields Required
Username:
Password:
prompt>enable
Password:
enable prompt #
User Name
User Password
Enable Password
Password:
prompt>enable
Password:
enable prompt#
User Password
Enable Password
Username:
Password:
enable prompt#
User Name
User Password
enable prompt#
(no credentials required)
Username:
prompt>enable
Password:
enable prompt#
User Name
Enable Password
Username:
prompt#
User Name
Username:
Password:
prompt>enable
Username:
Password:
enable prompt#
User Name
User Password
Enable User Name
Enable Password