Filter
Top Products
1-62
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
OL-8376-01
Chapter 1 FAQs and Troubleshooting
Internal AAA Server (WLSE Express Only) FAQs and Troubleshooting
Consolidating and Saving Log Files
The dumptech CLI command calls the diagnostic-info and tarlog commands, tars their output to an
archive called dumptech.tgz, and sends the output to a named user and location. For information on this
command, see the “Using the CLI” appendix in the User Guide for the CiscoWorks Wireless LAN
Solution Engine, Release 2.13 on Cisco.com at
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cwparent/cw_1105/wlse/2_13/u_gd/app_cli
.htm.
Internal AAA Server (WLSE Express Only) FAQs and
Troubleshooting
This section contains the following information for understanding the WLSE Express internal AAA
server.
Internal AAA Server (WLSE Express) FAQs
Q.
Can I use the WLSE Express’ internal AAA server for purposes beside WLSE/WDS authentication?
A.
No. The WLSE AAA server is a RADIUS server that allows client devices to share a common
authentication database, and cannot be used for any other purpose.
Q.
Can you set a maximum number of sessions for one "guest user" per user ID?
A.
No. You cannot set a maximum number of sessions for any user ID or automatically control session
management in any way on the WLSE Express. The only control over AAA sessions you have is
through the AAA session GUI and CLI, which allow you to display the existing sessions, and query
and delete sessions by user ID or session ID.
You can share one "guest user" account between multiple users; there is no built-in session limit.