Filter
Top Products
2-24
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
OL-8376-01
Chapter 2 Fault Descriptions
Voice Faults
Voice Faults
WLSE Faults
Table 2-4 Voice Faults
Fault Description Explanation Related Setting Recommended Action
Voice Bandwidth Exceeded
[Bandwidth In
Use:current%,Threshold:
threshold%]
This is a warning that is
triggered only when the voice
bandwidth in use exceeds the
threshold limit.
The higher the percentage of
bandwidth being used, the less is
available for new phone calls to
be placed or to roam in. The
default configured bandwidth for
voice is 75%. After reaching
100% of the configured
bandwidth in use, no additional
calls can be accepted.
Faults > Manage
Fault Settings, then
Edit the Default
profile. Select
RADIO-802.11a
THRESHOLDS >
Voice Bandwidth.
You can (at the expense of data traffic
clients such as laptops) increase the
amount of bandwidth reserved for
voice traffic. But a better solution
would be to find a solution that would
reduce the voice traffic on the
congested cell.
Table 2-5 WLSE Faults
Fault Description Explanation Related Setting Recommended Action
Auto Resite Survey
Performance
Degradations
There is at least one floor with a
20% difference in the base and
current performance values on one
or more floors configured for Auto
Re-Site Survey.
The fault will clear when there are
no longer any buildings or any
floors with 20% differences in the
performance values.
Radio Manager >
Auto Re-Site
Survey
Select the document with the eyeglasses in
the detail view of the fault condition. A list
of all buildings and floors that have
performance degradations is displayed.
First, check the details for the floor and if
needed, run Radio Manager Assisted
Configuration. Then select Auto Re-Site
Survey to set the new base values.
Data may not have
been successfully
restored from active.
The standby WLSE has detected a
failure in the active WLSE and is
becoming active before it
successfully synchronized with the
active WLSE.
Not applicable. Make sure the WLSEs are correctly
configured and functioning properly.