Cisco Systems OL-8376-01 Ventilation Hood User Manual


  Open as PDF
of 118
 
2-21
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
OL-8376-01
Chapter 2 Fault Descriptions
IDS (Intrusion Detection System) Faults
Number of TKIP Local
MIC failures is Degraded.
The fault threshold set for the
degraded state has been exceeded.
When the fault is cleared, the
following message displays:
Number of TKIP Local MIC
failures is OK.
IDS >
Manage IDS Settings
> IDS-802.11x
>TKIP Local MIC
failures
Verify that the fault threshold is set
correctly.
If the threshold is set correctly,
review your network to determine the
action necessary to clear the fault
condition.
Number of TKIP Local
MIC failures is
Overloaded.
The fault threshold set for the
overloaded state has been
exceeded.
When the fault is cleared, the
following message displays:
Number of TKIP Local MIC
failures is OK.
Number of TKIP Remote
MIC failures is Degraded.
The fault threshold set for the
degraded state has been exceeded.
When the fault is cleared, the
following message displays:
Number of TKIP Remote MIC
failures is OK.
IDS >
Manage IDS Settings
> IDS-802.11x
>TKIP Remote MIC
failures
Verify that the fault threshold is set
correctly.
If the threshold is set correctly,
review your network to determine the
action necessary to clear the fault
condition.
Number of TKIP Remote
MIC failures is
Overloaded.
The fault threshold set for the
overloaded state has been
exceeded.
When the fault is cleared, the
following message displays:
Number of TKIP Remote MIC
failures is OK.
Number of TKIP replay
errors is Degraded.
The fault threshold set for the
degraded state has been exceeded.
When the fault is cleared, the
following message displays:
Number of TKIP replay errors is
OK.
IDS >
Manage IDS Settings
> IDS-802.11x
>TKIP Replays
Detected
Verify that the fault threshold is set
correctly.
If the threshold is set correctly,
review your network to determine the
action necessary to clear the fault
condition.
Number of TKIP replay
errors is Overloaded.
The fault threshold set for the
overloaded state has been
exceeded.
When the fault is cleared, the
following message displays:
Number of TKIP replay errors is
OK.
Table 2-3 IDS Faults (continued)
Fault Description Explanation Related Setting Recommended Action
 previous next