Filter
Top Products
4 - 17
1
OVERVIEW
2
SCREEN
CONFIGURATION
3
OPERATING PROCEDURE
OF MELSOFT NAVIGATOR
4
USING SYSTEM
LABELS
5
CREATING SYSTEM
BACKUP DATA
6
USING PROGRAM
JUMP FUNCTION
4.3 Using System Labels on another personal computer
4.3 Using System Labels on another personal computer
This section explains a method for utilizing created system labels on another personal computer.
For using system labels on another personal computer, create a workspace in MELSOFT Navigator, copy it to
media such as USB memories, and edit the project.
The project edited on another personal computer requires verification and synchronization after the project is
imported back to the original workspace. For details of import function, refer to Section 3.8.2.
The following is an example of processing verification and synchronization on system labels of programmable
controller project. For processing verification and synchronization on motion controller projects, follow the
same procedure as described below.
1. Select [Edit] ⇒ [System Label] ⇒
[Execute Verification Synchronous with
System Label] in the menu bar of GX
Works2.
2. The message shown on the left is
displayed.
Click the button to display the
"Execute Verification Synchronous with
system label" dialog box.
3. Select an item under Reflection
Contents of Verification Synchronous,
and click the button.
4. The message shown on the left is
displayed.
Read the message and click the
button.
(To the next page)
Select
Click
Select