Filter
Top Products
3 - 38
3 OPERATING PROCEDURE OF MELSOFT NAVIGATOR
iQ Works
3.6 Setting Parameters
This section explains a method for setting I/O assignment, network parameters, parameters of FX series
special adapters, and multiple CPU parameters for project data (programmable controller project, motion
controller project, GOT project).
■ Setting I/O assignment
I/O assignment for each controller can be set without opening respective parameter setting dialog
boxes.
1. Click the module on "Configuration
diagram B".
The parameters are displayed on the Input
Detailed Configuration Information window.
2. Set the parameters on the Input
Detailed Configuration Information
window.
Setting example
• Start XY : 0000
• Points : 32 points
• Control CPU : CPU No. 2
For setting parameters, refer to user’s
manuals of each CPU.
Click