Filter
Top Products
3.4.6 Creating Ethernet configuration diagrams
3 - 27
1
OVERVIEW
2
SCREEN
CONFIGURATION
3
OPERATING PROCEDURE
OF MELSOFT NAVIGATOR
4
USING SYSTEM
LABELS
5
CREATING SYSTEM
BACKUP DATA
6
USING PROGRAM
JUMP FUNCTION
3.4 Creating System Configuration Diagram
● Module display on the configuration window
Check that the network modules on the Module Configuration window are connected to the network. If not, the
modules are not displayed on the configuration window.
● Detecting actual system configuration
The actual system configuration can be reflected to the Ethernet Configuration window by performing one of the
following operations.
• Click the button on the Ethernet Configuration window.
• Select [Online] ⇒ [Detect Now]
For the automatic detection of connected devices, refer to the following manual.
iQ Sensor Solution Reference Manual
● Reflecting communication settings of Ethernet devices
The communication settings of Ethernet devices can be reflected by performing the following operation.
• Select [Online] ⇒ [Communication Setting Reflection of Ethernet Device]
For the Communication Setting Reflection of Ethernet Device function, refer to the following manual.
iQ Sensor Solution Reference Manual
● Deleting Ethernet devices
The following shows a method for deleting Ethernet devices from Ethernet Configuration window.
1. Select the row of the Ethernet
device to be deleted. (Multiple rows
can be selected.)
2. Select [Edit] ⇒ [Delete] in the menu
bar to delete Ethernet device.
Select
Select