Filter
Top Products
3 - 46
3 OPERATING PROCEDURE OF MELSOFT NAVIGATOR
iQ Works
● Setting start XY in batch
Assign start XY consecutively to modules or empty slots in the order of slot number.
Resetting of start XY to each module is no longer required when replacing modules or changing number of points.
1. Select [Q Module Configuration] ⇒
[Start XY Batch Input] in the menu
bar.
2. The message shown on the left is
displayed.
Read the message and click the
button.
3. The message on the left is
displayed, and start XY is set.
Click the button to complete
the start XY setting.
● Setting default points in batch
Set default to all points of modules or empty slots on the base unit.
1. Select [Q Module Configuration] ⇒
[Default Points Batch Input] in the
menu bar.
2. The message shown on the left is
displayed.
Read the message and click the
button.
3. The message shown on the left is
displayed, and default points are
set.
Click the button to complete
the default point setting.
Select
Select