Filter
Top Products
3 - 28
3.4.7 Creating CC IE Field configuration diagrams
3 OPERATING PROCEDURE OF MELSOFT NAVIGATOR
iQ Works
3.4.7 Creating CC IE Field configuration diagrams
Create a configuration by placing modules on the CC IE Field Configuration window.
*1: For the parameter processing of slave station, refer to the following manual.
GX Works2 Version 1 Operating Manual (Common)
1. Double-click "CC IE Field
Configuration" on the Workspace
window to open the CC IE Field
Configuration window.
CC IE Field configuration diagram
*1
is
created.
2. Right-click "CC IE Field Configuration"
on the Workspace window, and select
[CC IE Field Configuration] ⇒
[Rename] in the shortcut menu .
3. Enter "CC IE Field configuration A" to
change the CC IE Field configuration
name.
4. Select a slave station
*1
from the
Module List window, and drag and drop
it onto the CC IE Field Configuration
window.
● Module display on configuration window
Check that the network modules on the Module Configuration window are connected to the network. If not, the
modules are not displayed on the configuration window.
Double click
Select
Drag & drop