Filter
Top Products
3 - 26
3.4.6 Creating Ethernet configuration diagrams
3 OPERATING PROCEDURE OF MELSOFT NAVIGATOR
iQ Works
3.4.6 Creating Ethernet configuration diagrams
Create a configuration by placing modules on the Ethernet Configuration window.
*1: For the parameter processing of Ethernet devices, refer to the following manual.
iQ Sensor Solution Reference Manual
1. Right-click "Ethernet Configuration" on
the Workspace window, and select
[Ethernet Configuration] ⇒ [Rename] in
the shortcut menu.
2. Enter "Ethernet configuration A" to
change the Ethernet configuration
name.
3. Select an Ethernet built-in CPU to be
set as an own station and IP address of
Ethernet module.
4. Double-click "Ethernet Configuration"
on the Workspace window to open the
Ethernet Configuration window.
5. Select an Ethernet device
*1
from the
Module List window, and drag and drop
it onto the Ethernet Configuration
window.
Select
Double click
Drag & drop