Filter
Top Products
5 - 6
5 CREATING SYSTEM BACKUP DATA
iQ Works
● Specifying data to be read
Specify data to be read from controllers by following the procedure below.
The following is an example of specifying programmable controller project data.
For specifying motion controller project data and GOT project data, follow the same procedure as described
below.
1. Click the button under
"Target Data" on the "Batch Read"
dialog box to display the Target
Data Setting dialog box.
2. Specify data to be read, and click
the button.
For details, refer to the Help function
of MELSOFT Navigator.
● Security set for project
When the security is set for projects of controllers, reset the security before executing the batch read function.
Reset the security by following the procedure below.
The following is an example of resetting the security of programmable controller project.
For resetting the security of motion controller project and GOT project, follow the same procedure as described
below.
1. Click the button under
"Security" on the "Batch Read"
dialog box to display the Security
dialog box.
2. Enter a user name and a
password, and click the
button.
For details, refer to the Help function
of MELSOFT Navigator.
Click
<FX series>
<Q series/L series>
Click