3.4.2 Creating module configuration diagrams
3 - 15
1
OVERVIEW
2
SCREEN
CONFIGURATION
3
OPERATING PROCEDURE
OF MELSOFT NAVIGATOR
4
USING SYSTEM
LABELS
5
CREATING SYSTEM
BACKUP DATA
6
USING PROGRAM
JUMP FUNCTION
3.4 Creating System Configuration Diagram
● Creating L series module configurations
When creating workspaces, select "L Series Module Configuration" in the "Choose a Default Configuration" dialog
box.
For creating workspaces, refer to the following section.
3.3 Creating Workspaces
● Mounting modules
When a module is dragged onto the Module Configuration window, the mountable areas are displayed in light blue
as shown below.
● Deleting modules
When a module is deleted from the Module Configuration window, the modules next to the deleted module are
connected automatically as shown below.
Mountable areas
Delete