Filter
Top Products
6 - 3
6.2 Program Jump Function
1
OVERVIEW
2
SCREEN
CONFIGURATION
3
OPERATING PROCEDURE
OF MELSOFT NAVIGATOR
4
USING SYSTEM
LABELS
5
CREATING SYSTEM
BACKUP DATA
6
USING PROGRAM
JUMP FUNCTION
6.2 Program Jump Function
The following explains a method for using the program jump function in the SFCS instruction.
For using the program jump function in the SVST instruction, follow the same procedure as described below.
1. On the Module Configuration window,
double-click the controller to which a
programmable controller project is
allocated.
2. The programmable controller project is
activated.
3. Select "POU" ⇒ "Program" ⇒ "MAIN"
⇒ "Program" on the Project window to
display the ladder program window.
(To the next page)
Double click
Select
The ladder program
window is displayed.