Filter
Top Products
3 - 50
3.8.2 Utilizing existing projects (import)
3 OPERATING PROCEDURE OF MELSOFT NAVIGATOR
iQ Works
3.8.2 Utilizing existing projects (import)
Utilize a project created in other workspace using MELSOFT Navigator.
The following operation is an example of utilizing a GX Works2 project.
For utilizing MT Developer2 or GT Designer3 projects, follow the same procedure as described below.
● Importing projects
Projects created using engineering software products (GX Works2, MT Developer2, GT Designer3, and RT
ToolBox2) and GX Developer can be imported to the workspace created using MELSOFT Navigator.
● Importing GX Developer projects
GX Developer projects are converted to GX Works2 format and imported to MELSOFT Navigator.
However, depending on the programmable controller type, some projects are not supported for import, or not
converted to GX Works2 format.
For details, refer to the Help function of MELSOFT Navigator.
In addition, a project imported in GX Developer format cannot be allocated to a controller etc. on the module
configuration window.
1. Select [Project] ⇒ [Import] in the menu
bar to display the "Import" dialog box.
2. Set "Save Folder Path" for the project
to be utilized, and double-click the
workspace name of the project to be
imported.
Setting example
•
Save Folder Path : C:\Documents and
Settings\Administrator\
My Documents
•Workspace
:
Sample
(To the next page)
Select